NEW PRODUCT!! AFRC - Ford 8.8 Housing - Bolt on Adjustable Control Arm Brackets (Includes new control arms)

We have built and worked on some of the fastest Mustangs on the East Coast. With each car varying in ride height and affecting the factory set instant center, we decided to fabricate bolt-on upper and lower control arm brackets for you to be able to adjust your cars instant center. The four holes of adjustment in the upper and 5 holes in the lower bracket allow you to tailor the hit to the rear tires to increase hook or tame the violent launch associated with most transbrake or stick cars.

Bolt-on Upper Adjustable Control Arm Bracket Kit:
TIG welded brackets
Grade 8 Hardware Double Adjustable
Chrome-moly upper control arms
Mild steel rod ends (chrome-moly available at additional cost)
*** THIS KIT DOES NOT COME POWDER COATED. THE COATING IN THE PICTURE IS FOR DISPLAY PURPOSES ONLY ***

Bolt-on Lower Adjustable Control Arm Bracket Kit:
TIG welded brackets
Grade 8 Hardware
Double Adjustable, Chrome-moly lower control arms (offset to increase tire clearance, no spring perches)
Mild steel rod ends (chrome-moly available at additional cost)
*** THIS KIT DOES NOT COME POWDER COATED. THE COATING IN THE PICTURE IS FOR DISPLAY PURPOSES ONLY ***
(This kit should be used with our bolt-on coil over conversion kit)


Weld-on housing brace: Designed to support the 8.8 housing when using our AFRC-S7150 upper brackets. This design is based on the same way most in the industry support the 9" Ford housing and makes the 8.8 virtually indestructible.