3" or 3.5" mild steel header collecter flanges laser cut from 1/4 thick steel plate. 3 bolt universal design
|
1/4" thick Mild Steel 4-Link bracket with 1/2" holes for greater adjust ability
|
1/4" thick Mild Steel 4-Link housing bracket with shock mounting holes. Features 1/2" holes for greater adjust ability,
|
1/4" thick Mild Steel 4-Link housing bracket. Features 1/2" holes for greater adjust ability,
|
Stainless Steel Window Mounting Strips. Can be used to flush mount your lexan windshield or backglass in your race car to give it a much cleaner look.
|
Stainless Steel bolt on dzus tabs for standard or pro-stock style dzus springs.
|
Stainless Steel weld on dzus tabs for standard or pro-stock style dzus springs.
|
Replacement Ladder Bar Brackets- Laser cut from 3/16" mild steel for use on a 3" axle tube. Each is designed with two 3/4" bolt holes that measure 6.750" hole centers.Fits AFRC Standard and Street Rod Ladder Bars and Comp Engineering Ladder Bars
|
Replacement Ladder Bar Brackets- Laser cut from 3/16" mild steel for use on a 3" axle tube. Each is designed with two 3/4" bolt holes that measure 6.750" hole centers.Fits AFRC Standard and Street Rod Ladder Bars and Comp Engineering Ladder Bars
|
Replacement Ladder Bar Crossmember Brackets- Laser cut from 3/16" mild steel. Each is designed to fit over 1 3/4" tubing and have five 3/4" bolt holes to mount the front of the ladder bar.
|
Replacement Ladder Bar Crossmember Brackets- Laser cut from 3/16" mild steel. Each is designed to fit over 1 3/4" tubing and have four 3/4" bolt holes to mount the front of the ladder bar.
|
7" long- Coil over shock housing bracket. Designed for 3" axle tubes, welds to rear end housing and accepts right and left lower shock mount tabs. Made of 3/16 mild steel with six 3/8" holes.
|
10" long- Coil over shock housing bracket. Designed for 3" axle tubes, welds to rear end housing and accepts right and left lower shock mount tabs. Made of 3/16 mild steel with nine 3/8" holes for much greater adjustability
|
1/8" mild steel lower shock mounting brackets with five 3/8" holes for greater adjustability and 1/2" shock mounting hole
|
Weld on wheelie bar housing brackets for 3" axle tubes. Brackets have 3/8" holes, 7 7/8" apart.Sold in pairs!
|
Laser Cut Tow Hook Bracket. 10 Gauge M/S (.134")
|
Laser Cut Mild Steel Shock Tab. 1/2" Hole Size. 10 Gauge (.134"). This is the same tab we use on our S1000 67-69 Camaro/Nova Coil Over Mount Control Arms.
|
Laser Cut Mild Steel Shock Tab. 1/2" Hole Size. 3/16" M/S (.187")
|
Laser Cut Mild Steel General Tab. 7/16" Hole Size. 11 Gauge (.120")
|
Laser Cut Battery Master Kill Switch Bracket, 15 Gauge M/S
|
Laser Cut Mild Steel General Tab. 3/8" Hole Size. 10 Gauge (.134")
|
Laser Cut Mild Steel General Tab. 7/16" Hole Size. 10 Gauge (.134")
|
Laser Cut Mild Steel General Tab. 1/2" Hole Size. 10 Gauge (.134")
|
Laser Cut Window Net Tab. 5/16" Hole Size. 15 Gauge M/S (.075")
|
Laser Cut General Tab. 1/2" Hole Size. 3/16" C/M (.187")
|
Laser Cut Front End Slider Plate. 10 Gauge M/S (.134")
|
Laser Cut Fiberglass Mounting Plate. 17 Gauge M/S (.054")
|
Laser Cut Front End Guide Tab. 15 Gauge M/S (.075")
|
Laser Cut Mild Steel General Tab. 3/8" Hole Size. 10 Gauge (.134")
|
Laser Cut Adjustable Cable Bracket. 10 Gauge M/S (.134")
|