These Flaming River racks are designed for the 5.0L (79-93) This 5.0 Mustang kit is standard 20:1 ratio.
|
These racks are designed for the 5.0L 94-04 Mustang -- non-Modular engines. The 5.0 Mustang kits are available in 20:1 ratio. These racks are ideal for road racing and other applications where a very responsive steering system is required.
|
These Flaming River installation kits are a direct bolt-in replacement for the 79-04 5.0L Mustang (non-modular engines). It eliminates the power rack, pump, pulley and rag joint for a total vehicle weight reduction of more than 30 lbs.
|
Price: Starting at $124.99
1979-2004 Mustang Rear Coil Over Conversion Kit for quicker more consistent 60ft times and better handling/ride quality.
|
MSRP: $369.99
Price: $299.99
You Save: $70.00
79-93 Mustang Chrome Moly Front Control Arms
Our control arms feature heavy duty chrome moly construction and are rod end mounted to reduce binding. They are all TIG welded and have extra bracing for use with high horsepower cars. Must use coil overs
|
Price: Starting at $159.99
Rod end mounted, double adjustable, TIG welded chrome-moly rear lower controls arms. Extreme duty to hold up to whatever power you can throw at them.
|
Price: Starting at $178.99
Rod end mounted, double adjustable, TIG welded chrome-moly rear upper controls arms. Extreme duty to hold up to whatever power you can throw at them. Compare to our competitors mild steel MIG welded models.
|
This kit was designed around the 79-93 Mustangs. It is required by the NHRA and IHRA when the battery is relocated to the trunk. Bolts directly to the tail light and requires a small hole to be drilled next to the licence plate for a push/pull knob.
|
Price: Starting at $79.99
Bolt-on adjustable upper and lower control arm brackets for 8.8 Ford housings. Allows for instant center changes to make the car hook. Includes chrome-moly control arms, all grade 8 hardware and brackets needed. Weld-on housing brace also available.
|
QA1's tubular K members are designed from the ground up for weight savings, improved geometry and as a bolt-in swap for the factory k-member in 1979-2004 Mustangs.
|
COIL-OVER CONVERSION KITS (Including Springs)These kits work with all QA1 Mustang struts & require the use of QA1's caster/camber plates. Each kit includes (2) 2-pc. upper spring caps with bearings, (2) spring seats, (2) set screws, (2) washers & springs
|
QA1 New style 1979-Present Mustang Double Adjustable Struts(Front) feature adjustable rebound and compression to suit your needs
|
QA1 New style 1979-2005 Mustang Adjustable Struts(Front)
|
Price: Starting at $164.99
QA1 Eco-Comp Control ArmsThe Eco-Comp control arms are an economical choice in tubular armsfor use on the strip. They are built with QA1s exclusive compressedrubber bushings and engineered for performance.
|
QA1 New style 1979-2005 Mustang Single Adjustable Struts(Front) "R" Series features single adjustable rebound and stiff compression like a 90-10 shock or strut
|
Price: Starting at $69.99
Coil Over Kit to be used with Mustang Struts. Includes threaded aluminum sleeve, aluminum spring nuts and spring cap. Springs NOT included.
|
Price: Starting at $79.99
Afco Mustang Struts feature race inspired valving for maximum weight transfer and bounce countrol (BNC). Optional coil over kit allows for ride height adjustment and precision chassis adjustment. Use with caster camber plates recommended.
|
Price: Add to Cart to View Price
Strange Engineering 10 Way single adjustable struts for 87-04 Mustangs
|